Hitleap Earning Auto Pilot Method [2015]

Hi Guys,

Today, I'm presenting you a brilliant share from my side. I've a method that alll of you might be searching for. It's the Hitleap Autopilot Method.

   As the Monetizing site, we'll be using GreatCPM

Without any delay, let's start the Tutorial Now.

INSTRUCTION

Firstly, you'll have to create a blogger blog. Pick a suitable title and a good looking template. I recommend Way2Themes. Then Add some content to it. ( Doesn't always have to be your's original but do not include anything illegal )

Now, Log In to GreatCPM and Submit your Blog there. Don't worry, approval is very easy and quick.

After that, you need a hitleap account with loads of minutes. You can checj out my other guides to get more minutes. 
It can be a regular account too.

So now, submit your link to hitleap with the following:

• Time - 10 Secs
• Referrer - Traffic Exchange ( for regular ) or others ( for premium )

After GreatCPM approves your site, add a 720 * 90 Banner in header and footer and the 160 * 680 in the side.

That's all. Happy Earnings.

P.S - I've created another thread including my review on GreatCPM and payment proof too.

- Avi Rizal

How To Create Multiple VPSs of Your Dedicated Server - Full Tutorial

Hi Guys,

Do you have a dedicated server lying abandoned? Do you want to take full use of it? Then I'm here to help. This is a quick and full tutorial that will help you to set up your Dedicated Server to host multiple Virtual Private Servers. I usually do this to get cheap VPSs for my hitleap, jingling & other SEO tools.

      So, without any questions, let's get started.

On average, I spend 25$ for my 8 GB RAM VPS + 3$ for 3 IPs. = 25$

  And I create 3 VMs for it. Which Brings me 2.5 GB RAM VPS @ like 8$ each.

      This VPSs will be faster than any other clouds in the internet as They're all shared, and we're working on Dedicated.

 Please note, IPs are very important . If you have only 1 IP, you cannot create any VMs as 1 IP - 1 VPS . If you use the same IP, hitleap, etc won't work as you'll have a single IP address for all VPS. So multiple IPs are very important.

    Note - IPv4 is MUST and IPv6 is Optional.

Requirments:

• At Least 4 GB RAM
• 4 Cores and Above
• Minimum of 250 GB HDD
• Network Speed 100 Mbps +

Let's Start Our Building Process

1. Dedicated Server

How to get a cheap Dedicated Server?

- You Can Use Google or Message me. There are popular providers like Contabo, iWeb & Others. I sell 32 GB RAM VPS + 30 IPS for only 100$ / Month.

My 100$ Package Includes:

• Intel Core i7-3770k
• 32 GB DDR3 RAM
• 2 x 2 TB HDD
• 30 IPs
• 1 Gbits Network

Selecting OS

Well, I don't want to make this guide more complex. So I choose ProxMox VE as virtualization. You can contact the provider ( even me ) to install it for you or manually install 64 bit Debian. Then there are tons of tutorials in Google to install it.

Working in The Server After Installing ProxMox VE

Basic Information

Once your Ordered Server is Delivered with IPs and ProxMox VE, you get a eMail saying it's access. 

1) This is the main ip, is not to be used for VPS, this IP can access Proxmox web interface, Which is :

https://xxx.xxx.xxx.146:8006 as example obviously you must replace that ip and only leave the port as 8006.

2) Well this is ip range you will use only this 4 ips

xxx.xxx.xxx.147

xxx.xxx.xxx.148

xxx.xxx.xxx.149

xxx.xxx.xxx.150

Downloading The Windows OS

First Of All, Download puTTY from their official site - HERE

Then  using the info, connect to your dedicated server like below.

Login as root then execute the following command:

cd /var/lib/vz/template/iso

Then you'll be given a screen like below:

Well now, you need windows server .iso download link.

The version is upon you but I recommend to choose the old one, Win Server 2008 because It's fast and efficient. And we do not want heavy CPU & Memory Leecher.

The Windows Server Repository here you can find any windows iso + direct ftp link.

http://forums.mydigitallife.info/threads/49120-The-Windows-Server-Repository

And Get the direct link and Hit this command in puTTy:

wget <direct iso download link here>

Just Press Enter and download will start.

It might be a large file, but your server also has a fast connection, doesn't it?

VM Setup 

Login & Setting Up VM

Go to this link https://xxx.xxx.xxx.xxx:8006 replace the xxx with your IP

Enter as root and write your respective password

After you can see your node info and other information.

But we will start creating the Windows VPS right now.

                       Start by Selecting Create VM At the Top

Give the VPS a handsome name.

Check windows 2008r2​

Select the ISO​

Configure Disk Space​

CPU allocation​

RAM allocation​

Network​

Confirm And Finish

Well once finished the server will appear on the left sidebar select it​

Installing Windows

Okay once you open the VNC the windows install should start so let's follow this install.

Press install again...

Check and next

Select the disk and then press next

                                       After next just wait for the installation

Configuring Windows Server 2008

Once the windows is installed and you already created the password lets config the internet connection and we are done

First close all starter windows we need to configure first the internet connection so you can login via RDP

On bottom right corner of taskbar right click on internet connection and open network and sharing center

Next click on Local Area Connection

Click first on properties then select Internet Protocol Version 4 then click properties again.

Here we config our internet connection as the system cant detect it by itself

Well going back to example info you can see that your range ip is as example 146-150 the one that ends on 146 its already used by Debian and Proxmox 3.2 so you need to put the next ip 147 so in ip address you put xxx.xxx.xxx.147

Subnet Mask and default gateway both of them are provided in the mail with all the information those ips works for all servers.

Also DNS always are the same for all VPS.

Then you press OK and done you have internet connection, now you can enable RDP and validate Windows for 180 days.

On the arrow number 2 was an windows validation link just press it and don't write any serial just press ok and it will validate.

Now press on configure remote desktop(arrow number 3 srsly?)

Check the allow connection and then press ok

Now you can login with RDP and make all other basic configs and start downloading your bots!

Finally

Congrats, you've sucessfully created your own VPS. You can use them yourself or even sell them for profit. Below is one of my VPS running with hitleap viewer :P .

So, that's all dude. Thanks for reading and Best Of Luck

- Avi Rizal @ Blog

[TUT] How To Install Jingling in Linux VPS [ MARCH 2015 ]

So guys, I finally figured out how to install and run jingling program in linux. It can be your personal computer or even those VPS.

The Main objective of this guide is to make people save money on buying linux VPS with equal use rather than expensive windows ones.
  
   So, without any further delay, let's start the tutorial.

Firstly, you'll have to install GUI for your Linux. This can be found in my another tutorial HERE

Now, after you've installed the GUI, connect your VPS GUI by VNC and follow the steps below:

INSTALL WINE ON UBUNTU using the command below:

add-apt-repository ppa:ubuntu-wine/ppaapt-get updateapt-get install wine1.7 winetricks

IF this DOESN’T WORK , USE THE CODES BELOW:

apt-get updateapt-get install wine

And then from the VPS DESKTOP got to :
APPLICATIONS> OTHER > WINETRICKS
Click it and it will prompt some Installation files , CLICK INSTALL IN ALL OF THEM till you get this window:

NOW , In order to Run jingling we need to install another other software :
Open Firefox from the VPS and download this software:

After you download it, you have to install it :

After the Installation go to the CONSOLE and type this command:

reboot

THIS will reboot the system.
Then open the command center again and type the following command:

vncserver -geometry 1024x768

Log in again to your VPS with TIGHTVNC
AND RUN JINGLING :

FINALLY JINGLING RUNS ON LINUX:

There is a small problem with running jingling on linux :
1) I will Pop up websites just like it runs on sandboxie on window vps .
If you know any software that stops this please comment below.

Thanks For Reading @ Avi Rizal

How To Bypass PayPal Login Verification

PS - This Guide is not for hacking purposes. I wrote this guide to help you if you mistakely fall into this problem, and you cannot access your phone now.

  There are two methods to do this

METHOD 1 - Very Quick :

1. Delete all the cookies of *.paypal.com
2. Clear all Hosted Data, History and caches of PayPal
3. Re-Connect to your Internet
4. Login & Enjoy

METHOD 2 A Little Longer- But Works

1. Click On Forgot Password
2. Request New Password
3. Go To Email and Click on the forgot password linl
4. Answer Security Questions
5. Change Password
6. Now simply login :)

METHOD 3 - Always Working

1. Get Your Phone
2. Install PayPal App
3. Login 
4. Now Follow METHOD1
5. Enjoy :)

Keep On Rocking :) - Avi Rizal

How To Get a Free VCC And Load Money Into It.

Hi Guys,
Today I'll show you how to get a VCC and load money into it. It's not any kind of Hacked VCC, Fake VCC and Payoneer.


Let's Get Directly to the Point

1. Register at https://mail.yandex.com/
2. Go to https://money.yandex.com and open a Yandex.Money account.
3. Go to https://money.yandex.ru/virtualcard/about.xml and click "Get card details". You'll get your VCC number and click "send in a text message" to receive the CVC and expiration date.

You'll be able to use it in Russian stores only. In order to to use it worldwide, you need to pass the identification process.

To load the VCC:

1. Click on your balance in the top right corner (the RUB symbol next to "Add"). You can find your wallet number there.
2. Register at Payeer (http://payeer.com/?partner=87009). You will be able to exchange BTC, OkPay and BTC-E to Yandex.Money instantly there.
3. Use the automated exchange.

To create a new VCC:

• Cancel (can be done at https://sp-money.yandex.com/tunes.xml?w=bank-cards) your current VCC and get a new one in 24 hours.

Once done, you'll get a MASTERCARD VCC starting with 5483 which can only be used in Russian stores until you pass the identification process.​

That's all and enjoy your VCCs :) - Avi Rizal

[TUT] How To Install Hitleap in Linux VPS [ MARCH 2015 ]

Requirement:

1. 1.Minimum 256MB Ram
2. 2.GUI On Linux vps(Check Last thread How To Install Gui)
3. 3.Your 5 Minutes
4. 4.Hitleap account .Sign Up Here!

1.Connect to your vps using ssh command line.

2.Remove unnecessary files

root@server:~# apt-get purge apache2* bind9* samba*

3.Update existing packages

root@server:~# apt-get updateroot@server:~# apt-get upgrade

4.Install Mozilla(if already installed then skip this)

root@server:~# apt-get install firefox

5.Installing Wine

 root@server:~# apt-get install wine

6.Connect to your VPS server in GUI mode

7.Open Mozilla firefox and download Hitleap Viewer and Open it with wine

8.Run Hitleap Viewer and Earn!!!! 

Happy Minutes And Keep Reading @ Avi Rizal

How To Install GUI in Linux[Works on Less RAM Linux Too]

LXDE XWindows Desktop GUI requires less RAM , so it is more suitable to a lower VPS plans with lower RAM available.

Connect To Your VPS server via ssh command line
1.Uninstall and remove all unnecessary services (if really not needed):

root@server:~# apt-get purge apache2* bind9* samba*

  
--Update existing packages---

root@server:~# apt-get updateroot@server:~# apt-get upgrade

---Install text editor “nano”---

root@server:~# apt-get install nano

2)  Installation:

root@server:~# apt-get install xorg lxde-core tightvncserver

Choose console country from the list, for example.: English (US)
Select keyboard layout, for example.: English (US)


3) Configuring LXDE VNC Server and create VNC connection password.

root@server:~# tightvncserver :1

This command starts server and asks you for a password. Important! This password will be used to connect to your VPS server GUI desktop, so use a secure and strong password (but not longer than 8 characters).

If you want to create an additional read only password then for a question:
Would you like to enter a view-only password (y / n)
 Y(es), and enter another password.
If the additional read only password you do not want, then respond, N.

---Stopping VNC----

root@server:~# tightvncserver -kill :1

---Edit VNC configuration file----

root@server:~# nano ~/.vnc/xstartup

In the end of the file add 2 new lines:

lxterminal &/usr/bin/lxsession -s LXDE &

After changes files might look like this:

#!/bin/sh
xrdb $HOME/.Xresourcesxsetroot -solid grey#x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &#x-window-manager &# Fix to make GNOME workexport XKL_XMODMAP_DISABLE=1/etc/X11/Xsessionlxterminal &/usr/bin/lxsession -s LXDE &

4) Restart VPS server

root@server:~# reboot

5) Connect to your VPS server on the SSH console after reboot and start VNC server:

root@server:~# vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565

6) Download and install VNC program on your computer from here:

Download VNC

7) Run VNC program on your computer: 

Enter in the VNC program address bar IP address of your VPS server and the end of address add a colon : with number 1 (as in this example, we launched VNC server, with the number 1), for example.:
192.168.0.1:1
Press “Connect” button and enter VNC password you have set before:

Done!!Enjoy

You can install additional programs and packages if you need, for example: Firefox

root@server:~# apt-get install firefox

If you want to change VNC password, then execute this command:

root@server:~# vncpasswd

Happy GUI, Avi Rizal